Wednesday, November 24, 2010

TIME says WWF to WWE is a horrible name change?

This article should say everything.

http://www.miamiherald.com/sports/wrestl…



If you can't check it, it pretty much says the Time Magizine put WWF%26gt; WWE on the bad list for worst name change. And that article takes it even further, saying that the general company (ted turner owns) behind that magazine is bias because they seem to hate WWE. CNN twisted Cena's words on steroids. Warner Studios(currently the CW network) canceled Smackdown after 2 years, then went to MyNetwork to beat CW in ratings.



Then Sci-fi to scyfy(who features ECW) is also on the list.

And so is TNA and SpikeTV.



Your thoughts?



And for the sake of people telling me, this is a stupid wrestling question, I will add a few more.



WQ: What is your favorite weapon to see under a wrestling ring?

WQ: Which type of finishers do you prefer. Quick and non-flashy (like a spear or a superkick) or a long and cool one (like the last ride or rude awakening)? I personally prefer quick so the match is for fast pace.



and



Do you think HBK would still be famous if he went by his real name, rather then Shawn Michaels? I'm not saying he isn't great or that name doesnt matter, but would it be different if you heard, Michael Shawn Hickenbottom, the Heart Break Kid. Mr Wrestlemania. The Icon. The Showstoppa. HICKENBOTTOM!!! This is for other wrestlers as well Like Chris jericho(irvine). How would irvine be used for Jericholics? And can you think of someone that might not be as great if they went by their real name? There isn't that many.TIME says WWF to WWE is a horrible name change?
wow thats very interesting. i personally like WWF a lot better. i mean you could say it in its entirety and it flows nicely compare to WWE. like, the following contest is for the world wrestling federation championship as opposed to for the world wrestling entertainment championship. thats why they always say WWE championship when they always used to use world wrestling federation championship.

but the points they bring up are interesting and i didnt know that, i agree the change was worse but it wasnt like going to wrestling entertainment world (WEW) or something stupid like that, i mean WWE isnt that bad and they were forced to change their name because of the world wildlife foundation



BQ. Ladder

BQ2 quick like sweet chin music, when its out of no where its more exciting and devastating



i think he would have had the same success but he probably would have been made fun of backstage as well as in promos. back in his prime he might have started a fight if someone made fun of him about it.

i dont think jerichos irvine is as bad as hickenbottom but i dont think it would have changed anything eitherTIME says WWF to WWE is a horrible name change?
The main thing I don't like about the name change is that it used to be WWF world wrestling Federation, now its wWE World wrestling entertainment so as the name says WWF had more wrestling now that I think about it quite a bit of the time WWF was more entertaining too.



WQ: something funny like a car door or a hot dog stand or maybe a match to set something on fire. I liked how Christian and Tommy dreamer got the car door and the hot dog stand



WQ: yes it could affect some superstars carrers in a bad wayTIME says WWF to WWE is a horrible name change?
I think it's sour grapes for Turner. It's a good point you brought up.

WQ 1 Triple H's sledge hammer

WQ 2 I personally like a fast pace match and like the super-kick and spear but if someone has really been a jerk during the match I like to see them get a good old fashioned finishing move with them knowing that they are going to get it.

HICKENBOTTOM really????TIME says WWF to WWE is a horrible name change?
i didnt read any of that as ive already read the article



but them saying 'it was a bad decision'

they were basically forced to do it.. so its pretty stupid



wq: i love seeing the ladder

wq:i like quick ones, but i also do like the ones that timeTIME says WWF to WWE is a horrible name change?
WWF was better, but WWE isn't bad either.



But yeah, Sci-Fi to SyFy is freaking horrible.TIME says WWF to WWE is a horrible name change?
The world wrestling federation... wasn't big enough for the logo WWF or WWF...

http://www.youtube.com/watch?v=3iDXKwGoj…TIME says WWF to WWE is a horrible name change?
Doesn't really bother me, WWF or WWE.

WQ : Steel Chair or Kendo Stick were always good to see come out.

WQ2 : The quick non- flashy one were the good ones for me to see.TIME says WWF to WWE is a horrible name change?
The WWF hippies. The wones who care about the rain forrests and stuff were crying over WWF having the name as well and they got sic of it and changed itTIME says WWF to WWE is a horrible name change?
Well, McMahon didn't purposely choose to change that name. His company lost a lawsuit against the World Wildlife Fund. That's why he had no choice but to change the name of his company. I'm pretty sure he would have much rather kept the old name.

Another question guys!!! how can i connect a desktop pc wirelessly to the interent?

Couple of days back i changed my network name and pass phrase of my internet connection. I did this using my laptop as i forgot the pass phrase. Now the problem is the desktop is doesnt connect to the internet. I've got a USB adaptor plugged in but it still doesnt work. Im using virgin media and i've got netgear router. can anybody help!!!



thanks in advance!!!Another question guys!!! how can i connect a desktop pc wirelessly to the interent?
Telenor internet eh??? LOL!!



Anyway.



Connect via RJ45 (ethernet). Either on the laptop or the desktop, whichever is more convenient. If you know the router's IP, then open the settings page in a browser and navigate to the wireless page. Turn the wireless security off temporarily. Make sure no MAC address filtering is switched on. Set the wireless channel to one about midrange (6 is best usually). Then connect both laptop and desktop wirelessly (still with the ethernet connection). Both should connect without issues. OK? Look at the DHCP table and see that you have 3 connections: 1 desktop wireless card, 1 laptop wireless card and the LAN connection from one of the two.

This proves that you can connect with the hardware and that all devices are functional. If you cannot connect in this way, then you have issues with yr hardware and will have to seek help from VM.



So, using the LAN connection, change the SSID to yr preferred identifier and change the security level to WPA if possible and enter a suitable key (WEP is weak, WPA2 is best but not always supported by hardware). Save the settings and reboot the router.



The router will now assign LAN IP addresses to the 3 devices and you will see the 'acquiring' icon in the system tray of the computers with wireless connections. Open Start/run cmd and type ipconfig /all in both machines. You will see the internal LAN IPs and the router (default gateway) detailed for each.



If any of the wireless connections has an IP starting with 169, then you have a problem with one of the wireless interfaces. Try changing channel on the router and avoiding interference objects like mirrors/water/mobile phones in the vicinity...



If both connect, reboot to make sure. Then you can add security like hiding SSID and MAC address filtering...

:-)Another question guys!!! how can i connect a desktop pc wirelessly to the interent?
You can get Telenor internet! It gives you an USB Dongle that has wireless net connection and allows your computer to use it!Another question guys!!! how can i connect a desktop pc wirelessly to the interent?
Basic Connectivity. NO Security.



Connect (wired) Modem to Router (wireless) to PCs.



Set router OFF.



Reset modem: Press RESET button.



Wait 60 secs.



Set router ON.



Reset router: Press %26amp; hold RESET button 10-20 secs.



Wait 60 sec.



PC Command Line:



Click [Start] - [Run...] - type: cmd, press [ENTER]



At the prompt (c:\.....%26gt;) type: ipconfig /release, press [ENTER]



At the prompt (c:\.....%26gt;) type: ipconfig /renew, press [ENTER]



TEST: Connect to Internet.



If SUCCESS: Repeat Steps after PC Command Line on your other PCs.



If NO SUCCESS:



At the prompt (c:\.....%26gt;) type: ipconfig /all, press [ENTER]



If IP Address == 0.0.0.0 connect PC (wired) to router (if possible) or modem and perform ALL steps again.
  • music player
  • give me some boys names
  • How do i get wifi on my iPod touch?

    I just got an iPod touch for christmas and i'm trying to set it up with wifi, i have the network coming up and all so i know that i'm getting a signal but it just keeps %26quot;failing%26quot; to join that network, i no that the settings and the password are all correct but it just won't work! anybody know what i'm doing wrong?



    I type in the network name,

    change the security settings to WEP

    type in the password and press 'join'

    (at this point it says 'failed to join')How do i get wifi on my iPod touch?
    mine is saying exactly the same and it is really beginning to do my head inHow do i get wifi on my iPod touch?
    what do you type in for the name of network??

    How to change my wireless Internet profile name?

    I would like to change the name of my wireless Internet profile - the name that shows up in the list when a wireless connection does a search for available networks nearby. I can't figure out how to change it through the network management or wireless management in Control Panel...I set this up about 2 years ago w/Windows Vista (now I have Windows 7), and I just can't remember if there is a way to go back and change the name w/o having to create a whole new network profile. Can anyone help?? Thanks!How to change my wireless Internet profile name?
    Well if your have a router then all you have to do is log into the router via your web browser usually 192.168.1.1 or 192.168.1.2 or 192.168.2.1 if none of these work then type the name of your router into google and type after it default ip address or go to cmd from run and type ipconfig/all and have a look what your ip address is and your default gateway. once your into your router its pretty self explanatory

    How do I change my Network on Facebook too My Highschool?

    most of my friends are in my Highschool's name Network on facebook

    ive been trying to get on it since I started using Facebook but Can't seem too

    My cousin uses it and can see everyones profile under that nextwork



    it says I have no network? but im sure I was in one?



    I hope this isn't too ConfusingHow do I change my Network on Facebook too My Highschool?
    To join a network, one of your friends on facebook who is on that network has to add you.How do I change my Network on Facebook too My Highschool?
    https://register.facebook.com/editaccoun



    Find you school and join. Sometimes you require a valid school email addess to join.

    Whats wrong with my network connection?

    I have a d-link dir615 wireless router. I have set up my network with a WPA password. My problem is that ever since the first time I installed it which was not long ago, the wireless connection to my laptop will work for about two days but then it will not work, it says %26quot;Limited or no Connectivity%26quot;; and the reason it gives me is that %26quot;the network did not assign an address to the computer%26quot; resulting in not allowing me to connect at all to the computer. The way I fix it is by always changing the network name, but I am tired of doing that, how can I fix the problem. I never had this problem with my old router.Whats wrong with my network connection?
    start/run type 'services.msc' (no quotes) - make sure your DHCP client service is running, if not then set it to start up automatically.Whats wrong with my network connection?
    have you tired just resetting it and setting up your computers connection again worth a try!Whats wrong with my network connection?
    Quick FIX:



    This may not be the best fix. But you can set you network adapter to have a static IP that coheres with your current DHCP scope.



    Or



    Create a DHCP reservation so that the DHCP server (router) will always hand your computer the same IP.



    Ta Da!Whats wrong with my network connection?
    I got the same setup. Sometimes after booting up, it shows connected but no throughput. I fix it by right clicking on the wireless connection and resetting the connection. This forces the driver to disconnect and reconnect and ask for an ip address. Kind of like warm booting the connection without restarting the laptop. Give it a try.Whats wrong with my network connection?
    If you say the network didn't assign your computer an ip address then it is the DHCP servers fault. When that happens go to start%26gt;run%26gt; type cmd press enter and then type ipconfig/release and then afterwards ipconfig/renew



    This will try and contact your DHCP server and try and get a new ip address.

    They know my network password to my wireless router, how do i disconnect them?

    Okay, so here's my story:



    For about a couple of months, my friend has been connecting to my router with his PS3 and his laptop. I GAVE him my network password.



    Now, his neighbor is connecting and I'm pretty sure it's to mine because my internet is reallly slow.



    So...I CHANGED my network name and password on my laptop, so after it was changed, my laptop was prompted to reconnect to a new one and I had to enter the password.







    BUT...There still connected! How? Didn't they have to reconnect like me? How can I disconnect them?They know my network password to my wireless router, how do i disconnect them?
    you can usualy see what devices are connected by going to http://home or http://(your ip adress) and entering all the right data. if that doesnt work put your foot through the ps3
  • for brittle toe nails
  • deleted myspace
  • I lost my wireless network and don't know how to get it back? please help ASAP!!?

    I went to 192.168.1.1 and I changed our network name which worked out fine, but then I tried to setup a wep key. Which it took cuz the connection reset, but now my wireless network will not show up at all. I don't know how I can get to my settings again or fix this. How can I get my wireless network back? Or do a reset on it. I can not find my linksys cd, but it was never much good to me anyway.....Please help asap!!! Thanks..........I feel horrible because now my roommates can not connect!!!

    powercycling does not work and I am already in the connect to a network area, but my network isn't there....thats the problem....it just disappeared :-(



    I am on windows vista and tried the reset button on back of router. I do not have modem hooked to router right now modem is to pc so I am able to get online to try to find out how to solve issue....



    so I take it I don't setup security using the 192.168.1.1? How do I set it up then? I can just google it too again? Thats not a big deal....as long as I can get our internet again! haha.....thanks for you helps....I will let ya know if it works! :-P



    Can I connect to 192.168.1.1 if the modem is not hooked to the router? Because it is not working..... :-(I lost my wireless network and don%26039;t know how to get it back? please help ASAP!!?
    ok start from the beginning like it was your first time.

    test with a wired connection that you have internet.

    Enable wifi on router, go ahead and setup wep encryption.



    On your laptop, you will need to clear internet cache.

    Go to run or search and type: cmd

    this will bring up a black screen.



    Type the following: ipconfig /flushdns



    test if you can see your router. If that doesn't work..



    Type the following: ipconfig /release

    then type: ipconfig /renew

    this will take a couple of minutes to renew. if nothing happens

    look for wifi switch on your laptop turn it off, restart laptop, then turn wifi switch back on.



    hopefully one of the steps above will get you to see your wifi network.I lost my wireless network and don%26039;t know how to get it back? please help ASAP!!?
    It seems like you may have switched off your wireless network's SSID broadcast. That will need to be turned back on, until everyone gets connected with the WEP key.

    How do I establish a Network/Network Printer?

    Okay, so I got this computer, and it's not on any specific network, it's just under my name...

    First, I would like to get onto the network that's established between my sister's computer, my dad's, and my brother's, called %26quot;OXFORD%26quot;. I changed my network name to OXFORD, but apparantly that doesn't work. We all print on the laser printer in the office, except me... I can't get it set up. I know it's a simple procedure on 2000ME or XP, but Vista is just... you know.



    Thanks for the Help!

    AnthonyHow do I establish a Network/Network Printer?
    The first thing you have to do is make sure you are a part of the network. If its just a simple workgroup (probable) you need to make sure your workgroup name is the same as all the others. You said OXFORD, so thats probably it. After joining the workgroup, reboot.

    After rebooting you need to map the printer just like you would a network drive. Go into control panel and install the printer just like you would on a local printer but instead, browse the network until you find the printer. When prompted to %26quot;save%26quot; that connection say YES. From then on every time you restart the machine it will automatically %26quot;map%26quot; the printer to your machine.

    3 problems on Networks [How to hide my PC name on local network] ?

    Hello, sorry for poor English but I hop u can understand me and help me

    anything can help is welcome please



    My first problem is my brother,he is childish, every time I fight with him or if I refuse to do him a favor he always change wireless network password, before I was able to find out the passwords because there was a network name linksys same as my brother's not sure it's kinda open port I always see it random showing only at a side of a home , I can connect to it and go to Router and see what my brother's password so I can connect on the main one , but he always find out he told me his Windows Vista has the ability to show who is connect to the network and he laugh besides he made password on router , I can connect via that linksys network but I cannot connect view the main router 192.168.1.1 he has password but I can view the one that 192.168.1.245



    1-How I can unlock the router password? and

    2-How I can hide my pc from showing to his Vista? I don't care if it's showing on router I just know he knows from Vista



    my third problem is : my uncle live next door , he knows my brother is childish because my mom told him so he allowed me to use his wireless and he gave me his password, he went with his family outside the country for medical care and it's been almost 2 months , his network was working with me so perfect but before 2 weeks I no longer can see his network on my Desktop PC so I though something wrong with the router there since nobody at home and the router open 24hrs but before 5 days and when I was trying to connect to linksys of my brother I saw my uncle's networks name but when I try to connect to it , it says : you cannot connect to network also it gave me once this message %26quot; The capability of your network adapter does not match the requirements of this network %26quot;



    the wired thing is that both my Desktop and my Laptop at same area but my Desktop doesn't show my uncle's network anymore!!!



    Desktop PC has wireless device on



    please guys help me , the linksys network is weak and it disconnect every time3 problems on Networks [How to hide my PC name on local network] ?
    1- If you mean, the router password used to get to the administration, that's kind of hard. Maybe if you make a phishing page, you can obtain the pass. If you men the router wireless password, you can use som Linux distro like Backtrack 3. Use airodump, aircrack and kismet ot get the key. If it's a wep, it could be cracked in, let's say 15 min. Others encryption like WPA could take too much time (kind of impossible)



    2- Use a firewall like ZoneAlarm and deny all the server request (except things like Messenger, etc.) If you block the NetBios rquests, your computer name could be hidden to everybody.



    3- This is not too clear. Maybe the router get nuts (yeah, sometimes they need a physical reset). Or maybe your brother change the wireless key ---%26gt; paranoia :D

    Ipod touch wifi trouble?

    got a brand new ipod and right out of the box it had problems wit the wifi.. it will see each wireless ntwrok and apparently connect to it, only to give an error message saying its not connected whenever web apps are used. the weirdest thing about it is the names change ever few seconds after connecting, having the connected network change its name and the normal network name pop up again. for example:



    Netgear ---%26gt; Nutgear ---%26gt; Ne^gear ----%26gt; Netguar ------%26gt; Nwtgeer



    like that, and the old normal netgear name will reappear on top of it, unconnected. any suggestions on how to fix this, if this if fixable at home or not?Ipod touch wifi trouble?
    um i don't know exactly what the problem is but i would recommend you talk to the apple people, or you could try a different internet connection... that's all i know, sorry if it doesn't help.Ipod touch wifi trouble?
    It is either a software problem or very likely it's your router. Update the firmware on your router (google the router model and look for it) or it may be required that you upgrade your router to a newer one.



    But before doing that try going to a place with WiFi like Starbucks and connect to it and see if it works.



    justinxtreme@live.com

    PLAYSTATION NETWORK NAME?

    ok, so I have a ps3, and I go on it A LOT. but my dad made my online name, how do I change it to what I like? do I have to pay or what?PLAYSTATION NETWORK NAME?
    cant change an existing one you would need to make a new profile. at the XMB scroll all the way to the left and go to add ne user or something to that effect, then you need to make a new PSN under that loginPLAYSTATION NETWORK NAME?
    no. sony offers a free network. everything is free unless u but a download or something. but mostly everything is free and no u can not hange ur account name once it has been made. make a new one if you don't like it
  • home theater
  • ram interrogate
  • How do I make my network work again?

    I made a wireless network for my roommate and myself and it worked fine until I got virus, then I got rid of the virus and changed the name of the network and now it wont connect, it says %26quot;connected to network excellent%26quot; but it wont actually bring up an internet page Ive reset it Ive done everything I can think of any help would be greatly appreciated! ThanksHow do I make my network work again?
    set the your gateway on TCP/IP into the IP address of your ISP, this should work. If it doesn't work, contact your ISP. There's nothing wrong with your network means the problem is in your connection with your ISP.How do I make my network work again?
    call the maker of your router. sounds like a setting is wrong.How do I make my network work again?
    did u check the IP's of your PC and your room mate PC and compare it with your router's IP. I think the problem is in the IP's.

    Also do check your wireless LAN setting and your room mate too. If can try to access your router and check for the settings. I hope I could solve your answer.

    How do I change the comuter name (Identification name) in linux ?

    In network (LAN) I find my computer has a default name like (HP500 U) but I don't find any option to change the name .

    My computer's O.S. is %26quot; Fedora core 2 (red hat linux)%26quot;How do I change the comuter name (Identification name) in linux ?
    with the command %26quot; hostname _your_host_ name_ %26quot;.

    logout nad login again you will find changes.How do I change the comuter name (Identification name) in linux ?
    You should be able to just edit the /etc/hostname file

    Most distributions will have a runtime script for the startup runlevel (usually runlevel 3, depends on your distribution) that will read this file and set it accordingly at boot time.

    Using WindowsXP/MS Outlook on network, how difficult is it to change a user name & domain for email address?

    I need to create an email address that has a different format and domain than what our office would normally use. Here is the current format %26quot;first.last@blah.com%26quot; ... but here is what I want to change this to %26quot;firstlast@blahblah.com%26quot; for a single user. One of the IT people is telling me this is impossible. I really think that changing a single user's username and domain is not impossible? Please help as I am trying to respect the IT dept and my bosses odd request. HELP!Using WindowsXP/MS Outlook on network, how difficult is it to change a user name %26amp; domain for email address?
    Your company owns the domain name blah.com. In order to receive e-mail under blahblah.com, your company would need to purchase the domain blahblah.com and set up its server to host that domain. It's not impossible, but it's a lot of work, and it costs money for a company to do. You shouldn't expect your company to do this unless there is a definite business benefit for the company. Changing the stuff to the right of the @ is a big deal.



    As an alternative, you could sign up for your own mail hosting account with a company like www.smileglobal.com, www.fastmail.fm, or www.everyone.net. You can pick your own domain and pay to have an e-mail account under it.Using WindowsXP/MS Outlook on network, how difficult is it to change a user name %26amp; domain for email address?
    I do not know how your system is setup, but the blah.blah@bla.com could normally be changed to blahblah@blah.com

    first.last@blah.com

    firstlast@blah.com %26lt;%26lt;%26lt;that is a simple one

    But the firstlast@blahblah.com,,where blahblah is the DNS, that is static.

    JimJones@guyana.com is easy

    jimjones@guyana.mookiwindow.com is not

    jim.jones@tool.com %26lt;%26lt;%26lt;old

    jimjones@tool.com %26lt;%26lt;%26lt;%26lt;new



    But still, if you have an IT staff, they are like the your first line of defense against unwanted garbage, so is advised to work with them. Through a working partnership and agreements that all can understand, is smooth operations for all concerned. This is done with dialogue and respect for one another.

    How can I set up my 2wire 2700HG-B wireless router?

    I've just bought it and was setting it up, one of the first things I did was change the network name and password and now the router doesn't seem to be producing a wireless network and I can't get on using ethernet.



    Any suggestions? The 2wire website was useless. Any help would be greatHow can I set up my 2wire 2700HG-B wireless router?
    first off the 2wire 2700g-b is a ATT/SBC wireless modem

    as for installin it, here are the steps:



    Manual setup and Registration on a 2Wire Homeportal (13705)

    This FAQ will cover the basic steps for setting up a 2Wire Homeportal and registering a new DSL account without using the install CD. Homeportals require NO software from the CD other then possibly the USB Drivers if you use the USB port. If you are using the Ethernet port all you need do is make sure your computer is set to DHCP.

    (If you already have your SBC/ATT DSL user account and password set up from a previous installation then just do steps 2,3,4,and 6)



    1) Familiarize yourself with the main points of this FAQ: 禄Ameritech - SBC FAQ 禄How do I register a username and password for my new account? - as you must finish the Yahoo registration after you have created your account and logged in.



    2) Install the 2Wire and connect up the computer and power on the Homeportal. After a little while you should have a green power light and flashing green (or solid yellow) Broadband light. Boot up the computer and you should get a green Local Network light.



    3) Start a web browser - all 2Wires can be accessed with just http://homeportal however if that fails you can try http://192.168.1.254 or http://172.16.0.1

    You want to go to the setup page at http://homeportal/setup



    4) On the setup page you will be asked for a keycode. The keycode for SBC/ATT is:

    522P-22P4-6262-22AT-F2NV

    This will set the basic configuration of the 2Wire to work with the SBC/ATT network. (You may also get a page asking you to set an administration password. This is used to protect the settings inside the 2Wire itself, and is not the password for your DSL connection. You can however use the same for both if you set them that way. Make sure to write down passwords as you set them so they are not lost.)



    5) Next you will be asked for a username and password. Use the Master Registration account information as from the FAQ above-

    Member ID: sbcyahooreg@sbcglobal.net

    Password: sbcyahooreg

    When this is entered you should get a solid green Broadband Link light letting you know you have basic access to the registration site. (You may get a page asking to set your time zone. Set it and that will finish the 2Wire setup.)



    Follow the steps in the above FAQ, by going to the SBC/ATT Registration site here: 禄https://sbcreg.sbcglobal.net/ (note the https)

    And there create your username and password and finish the SBC/ATT registration side of things.



    6) Once you have your username and password they must be set up in the 2Wire. Return to the setup page at http://homeportal/setup

    Leave the keycode the same, and on the second page enter your username and password for your account that you just created. Save this in the modem and then power cycle the modem so it resets and comes back up with your account. Your modem will now be connecting with your master account credentials through the PPPoE system, giving you full access to the internet.

    When you have 3 green lights you are online!



    7) Now you must complete the SBC Yahoo! Email part of the registration.

    Follow the second half of the FAQ above.

    --------------------------------------?br>
    For more information on the 2Wire Homeportal series, including access to the Management and Diagnostic console and tips and tricks, see the FAQs in the 2Wire forum. 禄2WireHow can I set up my 2wire 2700HG-B wireless router?
    You may find some BT routers are locked, so they only work on a BT broadband connection.How can I set up my 2wire 2700HG-B wireless router?
    Call a trouble ticket through your isp. They will send out a technician to help setup it up for you with a charge.

    I need to security-enable my wireless network...?

    Can someone please help me? I know how to get where the options are, I already changed my network name. But, there are about a million different options for security, and I don't know which one is for me.Thanks for your help!I need to security-enable my wireless network...?
    ok heres my suggestion DO IN ORDER AS LISTED FOR BEST RESULTS!:



    Network Name:

    You already did... +1 Kudo Buddy! :D my suggestion is to name it something completely random, like the name of ur perfume or favorite movie (also include numbers) having a random name like posted makes guessing your network name hard for hackers



    Encryption:

    WPA Personal (or WPA-PSK) [make the password something you can remember, but nothing too simple] DO THIS BEFORE CONNECTING ANYTHING TO THE NETWORK. any computer connected prior to this change needs to be reconfigured. just right click the wifi symbol in the task bar, go to the network settings, change the encryption and password on those computers



    SSID Broadcasting:

    TURN OFF (this allows other people to see your network) [only turn off AFTER YOU HAVE COMPLETELY CONNECTED ALL OF YOUR WIFI CONNECTIONS TO THE NETWORK!!!]



    MAC Filtering:

    There are extra options such as specifying which MAC addresses can use the network, but that is for overy psycho people. Doing the above should keep you secure enough.I need to security-enable my wireless network...?
    WEP is a standard protection so I would reccomend you switching to WPA that provide better protection than WEP.I need to security-enable my wireless network...?
    Exactly how you do it depends on the router, but if you know where the network name etc. is then you're in the right place. You want to switch the security mode to something other than %26quot;none%26quot;! WEP is pretty weak, so I'd go with WPA or WPA2. You might also get other options, like PSK etc. but for home security, those things really don't matter. Once you've changed the security mode, you need to give it a password. This is what you'll have to type when you connect to the network (only the first time, most computers will remember the passwords of networks they've joined before). If you post the specific kind of router, I can give you better directions.
  • Are satin bed sheets warm
  • self employed person
  • How to create a network windows vista pc to windows vista laptop?

    I have been trying to connect my laptop to my pc, i did created new connections names change names, in both PC and laptop, and now i dont know what is what. Is there a way to reset or clear that from both computes? Also If you know a site where i could follow instructions in detail to create a private network at home and share printer and some folders. Please help me.How to create a network windows vista pc to windows vista laptop?
    are you connected with a cable or wireless?

    if your connecting using wireless from the laptop and you have a wireless card in the desktop, go to the laptop en open network sharing center. choose to set up a new network. follow the prompts. then on the desktop just look for the signal and connect to it. put in the password and there you go.



    if you hard wired, make sure the cable is a crossover cable. hold the end-connectors side by side and see if you can see the colors of the wires inside. the colors should be in a different order on the two.

    then connect the two pc's with the cable. open network and sharing center and choose the wizard to set up a new network. follow the prompts and there you go.



    also check this out.

    http://lmgtfy.com/?q=how+to+set+up+a+net

    How do I change the name of my computer?

    Ok I know nothing about computers so I am going to try to explain this the best I can. I recently had a computer professional service my computer and he changed the ‘name’ of my computer from a NUMBER to “Jessica”. Please note I am NOT talking about the USER NAME of the account I am logged in to. I am referring to the name/number/address which identifies my machine. For example if a household has multiple computers on a network, they might be named 1.1.1.1.2 and 1.1.1.1.3 and 1.1.1.1.4 but to keep track of which machine is which you might just give them simple names. I need to know how to change my computers ‘name’ back to what it was before, because now all my iTunes music and security software is saying that this machine is not authorised/licensed to have that stuff on it. That is, my computer is now being mistaken for a different machine because it has a new name.



    ThanksHow do I change the name of my computer?
    If you have windows XP:



    Right click on %26quot;my computer%26quot; and click on %26quot;properties%26quot;



    Click on the %26quot;Computer Name%26quot; tab.



    Change it there, and/or click on the %26quot;change%26quot; button and change it there too.



    If you want to change your IP, open up %26quot;network connections%26quot;, right click on your connection and go to properties/ under %26quot;internet protocol...%26quot; go to %26quot;properties%26quot; and change it thereHow do I change the name of my computer?
    Thanks

    Report Abuse

    How do I change the name of my computer?
    Please tell my your operating system (xp, vista, etc.) and I may be able to helpHow do I change the name of my computer?
    Have you tried System restore ??

    Start-all progs-accessories-system tools-system restore .. to put your computer in the state before you made the changes, choose a suitable date.How do I change the name of my computer?
    if you are talking about host name then right click on My Computer (assuming you're using Windows stuff), click on Properties. A pop-up window will come up, there you'll find the place to change your computer's host name and workgroup name (I guess it's on general tab).How do I change the name of my computer?
    depends what you have

    HOW DO YOU CHANGE MY COUSIN'S LAPTOP NAME!?

    She named her Eee Laptop %26quot;BRILEY%26quot; and she has Windows XP, and so i have windows7 on my computer.,., i think it's the %26quot;network name%26quot; like i'll go into my computer on my laptop and it's under NETWORKS. she wants to change the whole %26quot;BRILEY%26quot; thinggggg.,.,help!HOW DO YOU CHANGE MY COUSIN%26039;S LAPTOP NAME!?
    If it's the name of the PC right click on %26quot;My Computer%26quot;, select %26quot;Properties%26quot;, click on the %26quot;Computer Name%26quot; tab and then click the %26quot;Change...%26quot; button. Enter the new name, click OK and then reboot. However, you mention networks - is it possibly the name of your wireless network? If so you need to connect to your router and update. Perhaps you can confirm.

    When I change my computer name , the old one still shows up in my network places.. how to get rid of please?

    Hi. When I changed my computer's name from my computer ( windows xp). . after restarting, the old one still shows on all of my computers (When i goto View workgroup computers in my network places)in the network... (So now it shows the new one, and is accessible, and the old one which just gives an error when clicked). how do i go about removing the old one as the icon is there in my net work places? Thank youWhen I change my computer name , the old one still shows up in my network places.. how to get rid of please?
    Go to your network places, right click the old name and delete it. This simply removes the link. The reason for this remaining visible is that the network browsing requires a cache to work reliably. Sometimes when a machine joins a large network it can take 20 minutes to get through the traffic and appear. If this happened every time you needed a resource, you would have to click it, go and make your breakfast and coffee, and maybe finish them before the files opened. In the meantime, your PC would have timed out and given up. This cache causes your machine to remember it's list, even if a machine crashes or shuts down, and therefore recovers rapidly when the absent machine returns.When I change my computer name , the old one still shows up in my network places.. how to get rid of please?
    i will give you free advice even it going to cost you money buy a new computerWhen I change my computer name , the old one still shows up in my network places.. how to get rid of please?
    You must power off your Data switch / Hub and then switch on after few munits .



    (All your network equipments' Names keep in memory of Data swiitch or Hub, you must clear memeory )

    How do i get rid of an old computer name in my network place?

    i set up a small home network for both of my computers. i changed my desktop computer name to a new unique name and it made me reboot. i went to my laptop to see my network places and to see the computers networked in the same work group but the old computer name is there. you cant click on it but its still there. i dont want the old name and the new name to appear in my work group network places. how do i get rid of it?How do i get rid of an old computer name in my network place?
    Just wipe out the network connection and set the network connection all over again. It should erase everything associated with your workgroup and let you recreate it.How do i get rid of an old computer name in my network place?
    You may have to delete it from the administrative computer. The computer you set everything up on. You should be able to delete it there.How do i get rid of an old computer name in my network place?
    go in to computer settings and fix it there...you might have to reboot again..the name you wanted might not have regesteredHow do i get rid of an old computer name in my network place?
    On the computer where the name doesn't change the %26quot;auto refresh%26quot; of network places is not active (cant thing of its name damn)



    To do this open network places. go to tools %26gt; folder options %26gt; then go to view. Make sure that %26quot;Automatically search for network folders and printers%26quot; is enabled. and apply it then ok.



    Then restart both machines. After a min or two the new name should show up.



    If this is not the problem then your registry may have a corrupt entry. Get a techinician or a scanner.



    Good Luck



    - - - - - - - - - - - - - - - - - - - - - - - - - - -

    http://www.3doms.com

    TechSupport@3doms.com (free)

    - - - - - - - - - - - - - - - - - - - - - - - - - - -
  • tvs
  • record settings
  • How do you change your network on Facebook?

    Well, I've been using Facebook for almost a month now...and I tried to change my network to my high school name, it didn't work, and it wasn't on there, but i see my friends with their network of their high school name, which is weird...I couldn't understand some things here. Can you help me out for an easy 10 points?How do you change your network on Facebook?
    http://www.facebook.com/editaccount.php?



    Type in your school name and just join up! Please note that you have to add a friend from the network you're trying to join in order to be in it.



    Also, if you graduated already (this includes this year of '08), you can't put your year. So if you were '07, you have to put '09. Not sure why they changed that.How do you change your network on Facebook?
    They got rid of the whole changing networks thing about 6 months ago, but if you email facebook (go to the help section) you can ank them and they may be able to help you.

    How do I change my administrater name?

    When setting up my computers (Vista) I used the admin. name (fictitious) ABC. Later I changed my log on name (to CBA) the usual way using -control panel/user accts/user accts./change your name. When attempting to network (later yet) I couldn't network among computer unless using the original admin. name (ABC). The computer still stores the (ABC) profile under computer/system properties/advanced sys. settings/(advanced tab) profiles. Nowhere is the (CBA) profile except on the log on screen. I'd like to rename the (ABC) to (CBA) to make it easier to remember. (3 computers). The first name i chose for myself (admin.) on each computer was not easy to remember. thats why i renamed later. I didnt know I'd be stuck with it forever. I found no way to rename the original profile (ABC) except for logging on purposes. I'm forced to network using the old admin. name. confusing...yes.How do I change my administrater name?
    u r rite,,, i didn't get it. so confusing :(

    How can i change my network on facebook?

    i want to change where it says: Name Here (high school) to what my college is. basically how can i make my college my main network?How can i change my network on facebook?
    Account %26gt; Networks...



    Search the college you want :)How can i change my network on facebook?
    go to edit profile and go under education.

    then click remove high school and add your college where it says to.



    i hope that helps! have a great day=)

    How can i change the name of client ?

    i had to change the H.D.D of one client but when i want to set the previous name a message tell me that the name was reserved how can i change that?

    by the way the client belong to a network domain baseHow can i change the name of client ?
    delete the client name in the domain, it will recreate when you add them

    How do i change my wireless network from "netgear" to "brian's wireless" or something like that?

    i own a mac laptop, and i use a netgear wireless router...i have never changed the default name of the router, so it always comes up as %26quot;netgear%26quot; but that means it's more vulnerable to hackers...i know that i should change it, but even on the netgear website, they don't give you any specific instructions beyond pushing the reset button on the back of the router itself...i can do that, but then where do i go to put a name on the network? is there a website, how do i get the ip address...the whole thing is such a mystery...it shouldn't be this hard...How do i change my wireless network from %26quot;netgear%26quot; to %26quot;brian%26039;s wireless%26quot; or something like that?
    Go to the netgear website, find the info for your router. Check your IP address, whatever is the gateway address (like 192.168.1.1), that's where you want to log in and change it.How do i change my wireless network from %26quot;netgear%26quot; to %26quot;brian%26039;s wireless%26quot; or something like that?
    http://tech.yahoo.com/gd/pc-wireless-netHow do i change my wireless network from %26quot;netgear%26quot; to %26quot;brian%26039;s wireless%26quot; or something like that?
    In most routers, you access this by typing the IP address 192.168.1.1 into your web browser while connected to your wireless network.How do i change my wireless network from %26quot;netgear%26quot; to %26quot;brian%26039;s wireless%26quot; or something like that?
    While connected to wireless connection, enter IP addressHow do i change my wireless network from %26quot;netgear%26quot; to %26quot;brian%26039;s wireless%26quot; or something like that?
    Once you have got to the configuration page of your router, you should be able to change the SSID field, which will be in the general settings. This may be different on your router, I looked at a belkin. Anyways, you will be able to change the display name of the router to what you want. I.E. Belkin5g4f to FREE TROJANS HERE or what not.
  • what is the difference between
  • Why do little dogs shake
  • How to erased a duplicate network?

    Sounds strange but I went on my xbox360 because I noticed I did not have a network connection. I see my network name has been changed and its has a WEP(i don't have it protected) and it says %26quot;Duplicate%26quot;? can't someone help me please I am way confused.How to erased a duplicate network?
    Rename your Networks SSID and always give it WEP protection. Someone may be repeating your WiFi network to leech off your broadband connection.



    Plug a cat5 ethernet cord into on of the four LAN switch ports on the router (and not the WAN port). Plug the other end into the PC.



    On windows

    Start--%26gt;Run

    cmd

    ipconfig /all



    write down the IP address of the Default Gateway on your Local Area Network Adapter.



    Open your web browser and type http://{IP address of Default Gateway}

    ie http://192.168.0.1



    The Web Administration Username and Password should be

    Username: admin and the Password should be left blank by default.



    Enable the DHCP server on the router. Save the settings.



    Now enable the Wireless radio and give it a name (SSID) and use encryption (64-Bit WEP is sufficient). Give it a 5 character password and REMEMBER IT (make it easy to remember like the first 5 digits or your phone number or your street address). Save the settings and the router should reboot.



    Now plug the WAN the cat5 cable into the modem and then other end into the router's WAN port. Cycle the power on the router.



    Wait about 30 seconds.

    Go to the laptop of WiFi desktop and enable the WiFi connection and scan for WiFi networks. Connect to your (the SSID you entered) then type in the password and you should be good.



    You can always use a cat5 ethernet cable and plug it into one of the 4 switch ports on the router to get a more reliable connection.How to erased a duplicate network?
    There is probably another router similar to yours installed nearby. You should ALWAYS set your own ssid to prevent such conflicts. Change the channel as well. I strongly advise you to use encryption for your own protection, anybody can steal your connection, also they can see every transaction on your network including user names, emails and even any clear text passwords, everything they want for identity theft. Also anyone using it to send porn emails or pictures will bring the authorities to your door, They will confiscate all your equipment.

    How can I rename my wireless network?

    I just bought a router for my new laptop,and set it up under a name which is too personal. I want to change the name of the Wireless network that shows up when I go to connect to the internet.How can I rename my wireless network?
    Reset the router and reconfigure it like the first time. There should be a very small button somewhere on it that you would push with a pencil tip or a paper-clip. Usually, you hold it in long enough for lights to blink, then you go through the software again as if you'd never done it the first time.How can I rename my wireless network?
    Routers generally allow you to administer them via a browser interface (i.e. connect to it using the web browser on your laptop).



    You'll need to check the documentation that came with the router to find out what the default IP address, login and password are (you should change the password ASAP).



    The 'name' of the network is known as the SSID; you can basically set this to anything you want.



    While you're in there, make sure you secure your wireless network as well. I recommend using WPA or WPA2 and a randomly generated key.

    Laptop won't connect to Internet on network?

    I have a Dell laptop running Vista. I recently moved into a friend's place, and connected to their wireless LinkSys router. Internet would work, however running Vuze would cause it to slow down, and eventually lose the Internet part of the network connection. I enabled port forwarding for two ports that I found searching for advice on how to fix the Vuze problem.



    It didn't work. Vuze continued to kick me off the Internet, and to get back on, I would unplug the power from the router, wait a couple seconds, plug it back in, and then the laptop would reconnect to the router and have Internet access again.



    However, now the LinkSys router seemed to reset, as it lost the typical network name. I changed the name back, added WEP security to the wireless connection. My laptop can connect, but there is no Internet.



    I also tried plugging the Internet ethernet cable straight into my laptop. No Internet.



    I plugged in the ethernet cable from a cable modem in the house, which is working on this Mac that I'm currently typing this on, and it still would not connect to the Internet.



    Why won't my laptop pick up an Internet connection anywhere?Laptop won%26039;t connect to Internet on network?
    set default Gateway ip= modem ip

    dns ip= modem ip

    okay it will help you

    if you have more question please contact me

    anilaydinalp@hotmail.com.tr

    anilaydinalp@yahoo.com

    Can I change my SSID again, once I've changed it from the default setting.?

    I've been to the place where you configure your router but it doesn't seem to have a way of changing it. I hope I'm using SSID right, in other words, I want to change my wireless network name. At this time, I'm not using wireless, but will use it when friends or relatives come to my house. I hope someone can tell me how to do this or if it's possible.Can I change my SSID again, once I%26039;ve changed it from the default setting.?
    You said you're %26quot;not using wireless%26quot; right now. Some routers will disable the SSID setting if you have the wireless feature disabled. There are no limits to the number of times you can change your SSID, at least with most routers.



    Note: If you got the router from your Internet Service Provider, they often work with the router manufacturer to customize the device to their needs which may include disabling / %26quot;locking down%26quot; certain features. It is possible the device has this feature locked for some unknown reason.

    How do you get rid of a phantom shared computer?

    I noticed on my Finder that I had an unknown shared computer connected to my home wireless network . The network was protected by a WEP password ,so how could another computer connect ? I restarted the airport ,changed the network name and changed the password . The shared computer had disconnected but connected again a day later,what should I do?How do you get rid of a phantom shared computer?
    i would say reformat your network and change it from a wep to a wep2 if you have that capability. if you don't take your internet off wireless and hook your computer up with a cord instead of wireless.How do you get rid of a phantom shared computer?
    it is hackers or spyware.

    he may steal your passwords while your are typing it.

    be careful next time when you change your password

    if it does not work, use professional tool to detect the threat, like Spyware Cease. try it as soon as possible. it will be safer for your pc

    http://www.spywarecease.com/How do you get rid of a phantom shared computer?
    disable remote connection.



    personally though i would trace it so i would have a record...How do you get rid of a phantom shared computer?
    HACKERS................thus reformatt now
  • growth of thin hair
  • goose hunting tip asap
  • In Win7, my network is named "Home 2" (under Network and Sharing center) How do I change this back to "Home?"?

    I am only connected to one network on my desktop via LAN to my DSL router. How do I change my network settings so I am connected to just %26quot;Home%26quot; or %26quot;Home 1?%26quot;In Win7, my network is named %26quot;Home 2%26quot; (under Network and Sharing center) How do I change this back to %26quot;Home?%26quot;?
    Click on your start button and then in that start menu, right click on %26quot;Computer%26quot; and select %26quot;Properties%26quot;. Scroll down to the bottom where it shows the network you are connected to and click %26quot;Change settings%26quot;. In the new window that pops up, click on the %26quot;Change...%26quot; button. There you can rename the network from %26quot;Home 2%26quot; to %26quot;Home%26quot;.

    Unable to connect to a specific wireless network?

    My laptop is running on windows Vista basic. Core 2 Duo. Recently, it won't detect the wireless network it used to connect. However, it able to detect other networks. I have a mobile phone that has wireless capability and iPod touch both gets the signal and able to connect and browse but not with the laptop.



    Nothing has been change on the location. These are the things I've done as far as troubleshooting is concerned.



    =Powercycle the adsl/wireless router

    =Restart the computer

    =Switch off/on the wireless

    =Remove the network on my wireless connection and manually added the network name and encryption key

    =Disable and re-enable the wireless connection

    =Check the wireless adapter on device manager. No yellow mark or something. I even updated the driver. And since the laptop is able to detect other networks that means the wireless adapter is working fine.

    =Access the wireless router setup page. I tried to change the wireless channel and increase the range. It didn't help

    =Change the name of the wireless network

    =No mac filtering on the router

    =Check EMI. Nothing has been added that may interfere the signal.



    Now, I couldn't think of anything else that I've missed of doing it. Can anyone help me how to fix it? I badly need your technical help.



    I would really appreciate it. Thanks in advance!Unable to connect to a specific wireless network?
    Several thoughts come to mind, what security software? There are a few times that some AV's / Internet Security Packages have caused this issue. You might just disable the security / AV to see if it does then connnect. One other thing that you might try is just changing the security code to see what occurs. Some drivers just simply don't like some WPA/WPA2 coding so switch to WEP and see if you connect. For tests you can even disable security. Be sure the SSID is unique and there are no other AP's with the same SSID within range.



    You can also assign a static IP address on the adapter, just to see if it connects. Sometimes I have had DHCP just simply not work with some routers / wireless card combo's. (You may need to update the OS system as well as the wireless drivers.)



    Other than those, you appear to have done all the things I would have.Unable to connect to a specific wireless network?
    Maybe your network server or DNS is not applicable with your laptop or maybe your firewall is blocking your connection.Unable to connect to a specific wireless network?
    Take a look at my response to another question posed:-



    http://answers.yahoo.com/question/index;



    Hopefully, it might be related to your problem.Unable to connect to a specific wireless network?
    If your laptop can pick other networks but not yours then your network down or not properly configured.

    For free support please visit http://allthingscomputeronline.com and leave a message for the tech guys

    Printer network password? How do I change the privliges of a client computer in a network?

    When I try to access files from my host computer (in the network) on the client computer (in the network), it says this:

    \\(host computer name) is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.



    The network name cannot be found.





    I'm not sure, but I also think this is why I can't get my client computer to be able to print in the network (printer is connected to the host). I do add printer, and go to the network, let it find the printer, It finds it fine, then I select the printer, click next, then a password pop-up thing comes up. My host doesn't have a password at all XD... how do I fix all this?



    I have all the computers in the network under control, and I think the computer who makes the network is the administrator, right? there are only two computers on the network. So I think I'm administrator... I just need to know how to change it from the administrator PLZPrinter network password? How do I change the privliges of a client computer in a network?
    R u sure this is a permissions issue %26amp; not something to do with your domain.



    Can you access the target print server by IP address?



    If you get the same result, but, have confirmed the server is up %26amp; running fine ( MS File %26amp; Print Sharing running OK, server pingable on the network, etc. ); then it may be either a local policy issue on the server, or a share permissions issue.



    If you are in a domain environment, check domain policy to ensure your machines %26amp; users have sufficient rights to access the server from the network %26amp; the printer is shared to the correct groups.



    If you are in a workgroup scenario, either create suatable local user accounts on the print server %26amp; share accordingly, or, share the printer to the Everyone group.



    You could also try connecting to the web printing connection. See if that works.





    Hope this helpsPrinter network password? How do I change the privliges of a client computer in a network?
    I had the same problem on time with the user name and password thing when trying to connect to a networked printer. It was hell trying to fix.



    In the end I found out the problem was the computer had a duplicate name as another computer in Active Directory. I had to remove the computer that hosted the printer from the domain then delete the computer that hosted the printer from Active Directory.



    I then renamed the computer and joined it back into the domain where it created a profile in the computers OU from there I browsed the network again found the printer and connected to it no problem.



    The way I seen that it had a duplicate name was from the Network Neigborhood panel and drilled down then read the computer names and seen the match.



    I really hoped this helped because I found no good solutions on the net and it took me forever to figure it out.Printer network password? How do I change the privliges of a client computer in a network?
    Your best answer is to contact a local repair service in your community and talk to a professional IT person.

    How do I change my user name in vista?

    I know how to change it in user accounts and I did that so now the folder on my desktop and my login has the new name but on the network it still says %26quot;Computer/oldname%26quot; and the folder in c:\users is also still my old name, how do I change them so they have my new name?How do I change my user name in vista?
    You need to rename your computer. You do that in the System Settings dialog. Here's a quick tutorial:

    http://www.howtogeek.com/howto/windows-vHow do I change my user name in vista?
    on the folder u can right click and hit rename

    How to change the name of my DSL internet connection?

    I only remember that I have to type admin and something in the network details but I tried that the server couldn't be found . What should I type to change it ?



    Thanks!How to change the name of my DSL internet connection?
    His trying to get into his router, so basically you just need your username and password. Get the default password for your router through the manufacturers website or just google it. To obtain your routers ip address jump on command prompt. Go to your run box or search box and type:



    CMD



    Then once your inside command prompt type this command:



    ipconfig



    The address for your router is the default gateway.



    Good luck :)How to change the name of my DSL internet connection?
    dude, you need to put in more detail of what you are trying to do? Your title says one thing but the text below goes on to something else.



    Are you trying to logon to your router?
  • How do you
  • one web hosting
  • Wireless network name?

    i just changed my wireless network name but my old one is still available...how do i delete it from the list so that people can't connect to it?? My new network name is protected but the old one is not.Wireless network name?
    The old name may just be saved in the computer that you used to connect to it., even if it is no longer active. did you use your wireless routers setup to change the wifi network name?



    I found some info on http://laptoplinkz.comWireless network name?
    You have to do a little exercise go to you system wireless network properties and remove the old AP setting form there and enjoyWireless network name?
    Your router isn't broadcasting the old name... It's just your client that is still seeing the %26quot;cached%26quot; name.



    By the way, changing the name won't keep other people from connecting to your network... Only enabling security (WEP, WPA, WPA2) will prevent them from connecting. (In the case of WEP, it will only deter someone from connecting, it won't prevent it if they want to connect, WEP can be cracked in a matter of minutes... It's kind of like locking your car door, but leaving the window open far enough for someone to reach in and unlock the door.)

    Has ESPN Radio officially changed its name to the Brett Favruh Network?

    Jesus H Christ, driving to work this morning, it's Howard Stern's day off so I swallow hard and turn it over to ESPN Radio and the Mike and Mike Tool Show. Golic's off, but Greenberg is all things Favre. %26quot;How's the coffee, Mike?%26quot; %26quot;Pretty good, I think Brett Favruh would like it.%26quot; %26quot;Take a good dump this morning Greenie?%26quot; %26quot;Yep, and I bet Brett Favruh did too.%26quot;



    Nauseating.Has ESPN Radio officially changed its name to the Brett Favruh Network?
    It 's still not as bad as the constant, non-stop coverage of Joe Torre leaving the Yankees. My God, you'd have thought the President had died. I'm just glad Favre didn't play in New York or Boston. If he had, we'd be listening to it for a month solid.Has ESPN Radio officially changed its name to the Brett Favruh Network?
    well, if so then they had to change it from the official Patriots Network that it was a few months ago.



    ESPN are the ultimate bandwagon jumpers.Has ESPN Radio officially changed its name to the Brett Favruh Network?
    yep bandwagoners for sure.Has ESPN Radio officially changed its name to the Brett Favruh Network?
    Dude, relax. You have arguably one of the greatest quarterbacks to EVER play the game who just retired after a 17 season career. Personally I think it's refreshing to hear about somebody else BESIDES Tom Brady and Payton Manning for 1 week out of the year.Has ESPN Radio officially changed its name to the Brett Favruh Network?
    These questions are getting nauseating. It's the first week of March, possibly the deadest point of the year on the sports calendar. When one of the top 10, maybe top 5, QBs of all-time retires, you're going to hear about it. If you don't like it, switch you Sirius station over to Elevator Muzak, maybe that will calm your over-excited *** down.Has ESPN Radio officially changed its name to the Brett Favruh Network?
    Im a huge Bret Favre fan but I agree! ESPN has made WAY too much out of Bret's retirement. Yeah for a day I can see them talking about it but even I'm saying ENOUGH!! He deserved the recognition but I dont even think Montana, Marino, Moon, or even Aikman got this much attention when they called it quits.Has ESPN Radio officially changed its name to the Brett Favruh Network?
    He just retired officially yesterday, so they are not allowed to talk about him for another day or 2. He is one of the best qbs that every played.



    You are missing the point. I guess you want it to go back to 2 weeks talking about some idiot getting arrested or leaving the scene of an accident like Briggs and having no consequences after filing a false report that it was stolen. How about weeks on Roger Clemens comings and goings or Barry Bonds which has been going on for years.



    Let's focus for once on something that is good.Has ESPN Radio officially changed its name to the Brett Favruh Network?
    No it shouldn't but give the man his due!

    Favre is deserving of any press that he receives.

    However, if they're still talking about it in September, then complain about it.



    I bet you didn't complain when the Patriots crap dominated the airwaves!

    How can I get Rid of a Wireless Network?

    When I first purchased my Router, I made an unsecured wireless network. As time went on, I figured out how to make a secured network. I changed the name of the network, and then secured it. But now thers two networks running off of my router. One is the secured one, and one is the unsecured one. I want to get rid of the unsecured network, how can I do this?How can I get Rid of a Wireless Network?
    Well, personnaly I didn't know that was possible. It is possible that your laptop or wireless computer still has the old one in memory but not for your router to have two running!



    You probably just need to delete the OLD non-secured one from the network list on your computer. To see what really is available open your wireless network connection and View Available networks.. if only the secured one is shown as being live then that is the only one running.. Now you could have a neighbor running unsecured and if neither of you chanaged the SSID it may appear you still have both running.

    To change the SSID log back on to the router, go to the wireless settings and CHANGE IT!.



    If you want to see if there is another router using the same name just unplug yours and see if the name is still available. Router mfgs set a default SSID all of them match so always change them!How can I get Rid of a Wireless Network?
    That will depend on your router. Check the manual.



    If it turns out that there isn't a way to simply delete a network, reset the router back to factory default settings, then set your secure network back up.How can I get Rid of a Wireless Network?
    On XP right click on your wireless network connection left click on View Available Wireless Networks click on Change the order of preferred networks select the network that is unsecured and click on remove.

    Deleting an existing playstation 3 network name or renaming it? how?

    hey, i have the 60 gb version of the ps3. im wanting to change my online name. is there a way i can do it? if i have to delete my current user i will. ive tried evrywhere but ic ant figure out how to rename or delete it to make a new user. i dont want to make 2 users. i want to delete my current one or rename it. i signed on and went to my user icon and hit triangle and went to account settings but i ddint see anywhere where it said to delete the account? any help would be appreciated. thanksDeleting an existing playstation 3 network name or renaming it? how?
    You can change name only on Japanese PSN.Deleting an existing playstation 3 network name or renaming it? how?
    You can't rename your account, you must make a new one. To delete your existing account first log in, then go to to the very far left icon on the menu (should be users) and press triangle when you come to your name and one of the options should be to delete the user. Hope this helps!

    How can I change the name of my computer?

    I bought a laptop that was previously owned, but only for about 2 weeks. The guy who had it before me named it TL, for his initials. I want to change the name of the computer to something more easily understandable to us on our home network (5 computers) but I cant remember how to do so. Help? Oh, and I don't mean how to rename drives or partitions.How can I change the name of my computer?
    Right click my computer icon%26gt;properties%26gt;computer name%26gt;change. If vista .....my computer%26gt;properties%26gt;advanced system settings%26gt;computer name%26gt;change.
  • like women with long nails
  • Need a soft, comfortable bed set
  • How do I change the name to my wireless connection and also add a password to it?

    When I checked my internet connection, I found out that someone placed their own name (which isn't ours) on our network. Now I need to rename it and also add a password for added security.Help!How do I change the name to my wireless connection and also add a password to it?
    go to a browser

    type in 19.168.0.1

    user name is blank (unless you made one)

    password is usually admin



    Once in, make a new password.

    Then add mac filtering.

    get your mac address

    start%26gt;run type cmd

    then type ipconfig /all

    its the physical address.



    The if its wireless add a keyword so no one can get on and also dont broadcast your ssid nameHow do I change the name to my wireless connection and also add a password to it?
    Go into your router by entering its IP into your browser as if it is a web address (like: http://192.168.1.1)



    IF you do not know the IP address, click on Start %26gt; Run %26gt; Type in: cmd

    In the window that opens type in: ipconfig

    Look for the Default Gateway listing - that will be the router's IP



    As you did not list the make and model, I can not give additional step by step - each is different. But you will find a place in there were you can set up the WEP or WPA password, and rename the network. Look around....



    You might also want to consider changing the last number in the IP address of your router. They all come with the same IP address, which makes getting into their set up easy. If you change that last number, it is more thing a hacker has to figure out before they can access your router in the future.How do I change the name to my wireless connection and also add a password to it?
    Both above answers are good advice.

    Also, while in the router's 'Administrative' section, you should disable the 'UPnP', and get any software updates (there should be a tab/button for that).

    Set encryption level (for users to access the internet) on WPA and create an industrial strength passphrase for that (note: some older lappers %26amp; cards do not support WPA; use at least WEP however, as a last resort).

    Also, 'BM's router interface address should be 192.168.1.1

    For a Ipod to not connect to my linksys what do I need to change as far as router pass/network name/security k?

    I need some techie help. I am not really good with the operation of computers. Basically I gave my daughter the passwords to connect her ipod and computer to my Linksys modem. Due to from what I caught with myspace and her being a minor I need control over where she goes for her safety. What would I need to change so a ipod cannot connect anymore to my network modem. And could you please tell me how to do this. I've googled it and my disk says failure to redo the setup all over again. Do I need to reset the IP? First correct answer get the points o.oFor a Ipod to not connect to my linksys what do I need to change as far as router pass/network name/security k?
    Hmm, tricky. Frankly the iPod Touch (which I assume you're talking about) is extremely versatile with its network connectivity options. However, you can use something called %26quot;MAC Address Filtering%26quot; to block the specific iPod.



    Essentially, every device that can connect to a network of any kind has something called a MAC address, which is tied in with the physical hardware of the device itself and thus cannot be changed. What you need to do is:



    1) Take your daughter's iPod.

    2) Go to the Settings application (it looks like a set of silver gears)

    3) Tap 'General' then 'About' and the MAC address (listed here as %26quot;Wi-Fi address%26quot;) should be there. Write this down, with colons included.



    Now I could type out how to log into your Linksys router and block the MAC address, but frankly this link is much faster:



    http://www.tekstenuitleg.net/en/articles/networking/wireless-security-guide/mac-address-filtering.html



    When it's all said and done, the iPod should no longer be able to connect to the network, no matter what your daughter does. Try it just to be safe though.

    How do I make my name invisible to people not in my network on facebook?

    Thanks in advance! Is the best way to change my name? I don't want potential employers to find me.How do I make my name invisible to people not in my network on facebook?
    1.Go to privacy settings

    2. Click on search

    3. Customize who can search for you. For example you can make it just your network, or your friends of friendsHow do I make my name invisible to people not in my network on facebook?
    go in facebook then on the left side.. it has tab called account privacy go in there,, and you will see a place wer it will say that you can allow wht ppl u want ur profile to be seen.. lik family network.. and all the other stuff.. :) hoppe it helps.. :)How do I make my name invisible to people not in my network on facebook?
    If you want potential employers not to find you! In that case follow the advice stated above of how to do it, however set the privacy setting to %26quot;only friends%26quot;. Cause your potential employer can still be on your network from the region, school or university. He could be a friends of a friend! One never know!

    How do i change my publicly viewable Playstation Network ID?

    I want to change the name that appears when im playing online. Can someone please tell me how?How do i change my publicly viewable Playstation Network ID?
    have to make a new PSN ID



    1. in ps3 main menu create a new user

    2. log in to that new user

    3. click the button that says sign up for psn idHow do i change my publicly viewable Playstation Network ID?
    you have to kill you Psn account and create a new one, thats the only way i can think ofHow do i change my publicly viewable Playstation Network ID?
    i dont think that that is possible

    Sunday, November 21, 2010

    How do I change the name on my wireless connection?

    When i set up my laptop I put in a name for my connection that people can see when they are looking at who is using wireless in their network. I accidently put my name and I would like to change it to something else. Any idea how i do that? I have a inspiron 1525 laptop. thanksHow do I change the name on my wireless connection?
    right click my computer %26gt; properties %26gt; click on the computer tab %26gt; click the change button %26gt; change the computer name. Use this option if WORKGROUP is checked.



    Use this if you are joined to a domain. Follow the above directions to get to the dialoague box, but you have to unjoin the domain. Repeat the steps above change the name and rejoin domain.



    Hope this helps.How do I change the name on my wireless connection?
    I believe you meant to change your computer name on Windows Vista. To do that, follow the link:



    http://www.howtogeek.com/howto/windows-v
  • mobile
  • hair spray
  • How can I find my Host and Domain name when setting up a Linksys Wireless G Router?

    I am trying to set up a secure how network for 2 laptops. I have the SSID changed and the network name is broadcast, but how do I secure this? I think I need to change the settings since I can just browse to the network and connect.



    If this helps, I have Brighthouse Cable for broadband access in the Central Florida area.How can I find my Host and Domain name when setting up a Linksys Wireless G Router?
    host is another word to describe the local computer and domain you don't need unless you are connecting to a domain controller.



    you are supposed to be able to browse your own network with out using passwords. you can change these settings if you prefer so that any time you want to connect from computer A to B you have to

    supply a user name and password.How can I find my Host and Domain name when setting up a Linksys Wireless G Router?
    To secure your wireless network you want to go into the config of the router via your browser and enable WEP or WAP security, which ever you router and client cards support, and pick a security code. Then you will have to goto each client (computer) and set the security code you used in the router settings so they can connect to the router. Any computer that tries to connect to your router without the correct code will not be able to.

    How do I change the "name" of my wireless router as it shows up when looking for a network?

    I have a 2Wire wireless router, and when I look for it on my laptop, it shows up as %26quot;2Wire868%26quot; Is there a way to personalize the name it's showing?How do I change the %26quot;name%26quot; of my wireless router as it shows up when looking for a network?
    Enter the IP address of your router into your browser address bar.



    Look for the Wireless Settings options. It should have an entry that says:

    Wireless (or Network) Name: 2Wire868

    You can change it there and updateHow do I change the %26quot;name%26quot; of my wireless router as it shows up when looking for a network?
    you will need to search your instructions online to find out what your internal ip is, then type taht in in your web browser, but instance Belkin is 192.168.2.1 This is where u can change your settingsHow do I change the %26quot;name%26quot; of my wireless router as it shows up when looking for a network?
    Try logging into the router with this address:

    http://192.168.0.1



    You should need to enter a user name (probably %26quot;Admin%26quot;) and a password. Now where would that be...



    Find the wireless settings and change the SSID there.

    I am unable to change the name of a hard drive that has a system partition on it. Any ideas?

    For instance we have a network drive that is named %26quot;H:%26quot; but when we got a new computer, it has already taken the hard drive name of %26quot;H:%26quot; and thus it is unable to access the network drive. Have any ideas on how to solve this?I am unable to change the name of a hard drive that has a system partition on it. Any ideas?
    Assuming Windows XP - directions for changing drive letters is provided below.

    How do I change my WEP key password?

    This summary is not available. Please click here to view the post.

    LINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?

    I mean...how do i change the name of the Wireless connection that...people see on their laptop... Right now they see LINKSYS...but can i change that to some thing else....nameLINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?
    You have to use http://192.168.0.1/ to access it. Then enter your id/pw to get to the admin screen. There is a screen where you can change the name that shows.LINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?
    There's usally an ip addresse you can type in and go into your router. Once you're in there you can change it up.LINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?
    you have to log into your router -- i believe it's http://192.186.1.1 and log into it using your user and pass, but check your manual for more details-- and then go to the setup and look for the current name of your router, then change it and update the settings.LINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?
    Try reading the manual that is on the CD that came with your router. It gives good instructions. Note, you do have to type in an ip address to access your router. I do hope you are using 128 bit encryption.LINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?
    It's in your router settings...the setting is called SSID. Change that to whatever you want it to say.LINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?
    For a linksys router, you need to enter the ip address of 192.168.1.1 on the url address in your browser. This will bring up a display panel of linksys for you to logon. If you have not logged on before, then I believe the userid is a blank and password is admin. If this is not correct, take a look at your documentation for linksys. Once in, go to the wireless tab and under Wireless Network Name (SSID), enter the name of the network you like to have and save the settings. Then get out of linksys and you are done. Good Luck.LINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?
    The Correct IP address for your linksys router is %26quot;192.168.1.1%26quot;. when the security window opens leave the %26quot;user name%26quot; blank. The password is %26quot;admin%26quot;. Just click on the basic setup and Change the %26quot;SSID%26quot; to your choice of network name . Don't forget to save your changes or it won't work. Then go to your %26quot;Network Connections%26quot; and right click your wireless connection. then click on properties , click on the Wireless Network tab and down in the preferred networks box is where you can add or delete a network. So if you go to your favorite Coffee shop and you want to use their connection just add the network name to this list. Don't forget to make sure the data encryption box is NOT checked . I hope this helps you.LINKSYS ROUTERS? Is there anyway ..i can change the name of my wireless network?
    Simple my friend:



    *Open a browser. In the address type: \\192.168.1.1 and enter

    *Once prompted, enter UserName %26amp; Password. If it's the 1st time, leave the Username blank %26amp; type admin for the password.

    *Goto the wireless tab in your screen menu.

    *Look for SSID. Change it from Linksys to any name you want.



    ================================Simple?:)



    I also suggest you have a tight security turned on. So ppl don't play around ;)
  • purchase petri oil
  • waxing hair removal creams
  • How do i turn off the Iphone EDGE network?

    I went to Settings%26gt;General%26gt;Network%26gt;EDGE%26gt; and changed the name of the top line (Which is supposed to mean I cant connect to anythign because of an incorrect network name). Still the edge betwork symbol pops up when Im not in wifi, ive rebooted to see if that wa sthe problem a few times but it still stays up. What are some ways to turn off the edge network?How do i turn off the Iphone EDGE network?
    Reset to factory setting or simply correct the proer network name.

    How do i change a devices name in which the network detects?

    i went into my router and wanted to find the drivers attached to it and the name of the devices were shown but some said it hade an UNKNOWN name i tried changing the computers name and it still detects unknown in the router

    how do i chang its name for the networkHow do i change a devices name in which the network detects?
    Some routers do not know how to read hostnames from computers properly. There may be no way around this unless a future firmware upgrade fixes the issue.



    Something could check would be if the router allows you to delete the connected computers from the list of devices and then disconnect and reconnect the computer to see if it updates the name.

    How do I change the name on a network printer?

    I print to several computers on the network at work. Is there a way to change and simplify their names? It would make my life a lot more simple if I could show them as Bob's printer, Sally's printer, or My printer instead of Officejet %*@, HP Printer 7200 on %$$^%26amp;, ect ect. The drop-down menu with all of these long names is kind of confusing.



    Is it possible to rename them so that I can easily select the one that I want?How do I change the name on a network printer?
    Problem: In Windows 2000/XP you cannot rename network printers, a function that exists on the Windows 9X operating systems. Network printers that appear on the same on the network are difficult to differentiate.



    Solution: Microsoft has documented that you are no longer able to rename network printers in 2000 and XP operating systems, however, you can still rename the printers from the registry.



    Caution must be used, because if the printer naming is done incorrectly, it may cause loss of connection to that printer and/or you would have to re-add that printer using the Add Printer wizard.



    The network printer you want to change must first be added to your computer. (There must be a network printer icon in the Control Panel %26gt; Printers).



    If you want to rename a network printer, follow these steps:



    Go to Start %26gt; Run %26gt; type regedit. This will open the registry.

    Browse to HKEY_LOCAL_MACHINE\System\Current Control set\Control\Print\Printers

    Select the printer you want to rename in the left panel.

    In the right panel look for a key called %26quot;Name%26quot; and double-click.

    This will allow you to change its value. DO NOT OVERWRITE THE WHOLE VALUE! The only part that you can change is the final part of the value.



    Example: \\unassigned 'laserwriter'\Laserwriter 12-600 you can change this to:

    \\unassigned %26quot;laswerwriter'\My Laserwriter

    Once you have changed the value, restart the machine. The changes will not take effect until after you reboot.

    Note: In some cases the icon may change, but it should not effect the printer functionality.

    How do I set up my network on Windows 2000?

    I have two computers that I want to network. One is Windows XP and the network name is MSHOME. The other is windows 2000 and network name is WORKGROUP. How do I change the name on the Windows 2000 O/S to MSHOME?How do I set up my network on Windows 2000?
    Make sure you have administrative previledges on the Windows 2000 computer.

    Right click my computer - Select properties - Computer Name Tab - Click Change on Rename this computer - Under Workgroup Set the MSHOME - Hit OK - OK all the way down and restart your computer. also make sure other settings are also made accordingly.



    Pictoral reference is here

    http://www.aultcomputer.com/setnetwork.hHow do I set up my network on Windows 2000?
    Hi

    Windows 2000 is itself a server version

    If you know the domain name then it is fairly simple.

    Connect the two systems with UTP connectors.

    Goto the properties of My computer in the 2000 then goto the network id and give the domain name over there.

    You will receive a message box showing that it is connected.

    How to get rid of older unused network connections?

    i've reconfigured my home network several times, changed network names, added and removed hardware. my pc stores the previous network conn. profiles and i think i'm up to connection 5 now. how do i remove the obsolete profiles?How to get rid of older unused network connections?
    No I dont think it does(keep old local area connection profile, I mean), though is does like to give them each a unique name, and its not very creative, which is why you're current and only, network connect is named %26quot;local area connect 5%26quot;. You can rename it say to remove the %26quot; 5%26quot;.



    Just don't call it %26quot;Steve%26quot;!!!! (Yes that's an example from experience, it creates confusion for telephone/internet tech support if you ever need it)How to get rid of older unused network connections?
    Go to control panel then network connections . Select the conneciton you dont need and then simple press deleteHow to get rid of older unused network connections?
    If you're using Windows xp, just go to my network connections, and delete the connections that don't do anything, (shift+delete). If that gets rid of all the system files, I dunno. If you know what you're doing, you might want to try manually deleting them, but only if you really know what you're doing.How to get rid of older unused network connections?
    delete it
  • different myspace
  • What name should I give my dog
  • Change network file names??

    I have a home network and access files off my desktop with my laptop. I cane see and access the files on the desktops drive. I have an external hard drive on the desktop and it is shared. I can acess those files as well. I can not change file names on the external hard drive. I get the error message that make sure file is not write protected or in use. The files aree not write protected and they are not in use. Any help pn how I can be able to change files on the desktop computer from my laptop?Change network file names??
    On the machine it is connected to, right click the shared drive or folder, in security set everyone to full access, and ensure you let it set the same rights to all it's subfolders and files.Change network file names??
    On the desktop computer, go in to computer management (right-click on my computer and click manage). Under shared folders click on open files and check to make sure there aren't any other instances of that file open. You may have had the file open at one time and when you closed it, it didn't close properly. Close any instances of the open file and then try renaming it.

    I'm having a wireless DSL network that works thru an ISP, i want to change the name of my network. how?

    The SSID name? Depends on the router you are using, but you should be able to logon to the router and change the SSID name.

    Change name of local profile home directory?

    A friend want name of folder in C:Documents and Settings changed. Folder Is named JaneP and wants to change name to JaneG. Signs on to AD network currently as JaneG. How do I change name of this local system folder and still ensure sign-on and access ok? Thanks.Change name of local profile home directory?
    You can rename the profile in AD and she will only see the new name on the logon, but the old directory name will remain.

    If you really want to do this

    The easiest method (there are several)

    1. create new profile

    2. copy old profile over the top of new profile.

    3. set permissions for entire file structure (advanced permissions) for full access by new user.

    4. logon to pc and test.

    This may have errors on the logon - in which case you will have to go through the registry settings of the server to see what parts of the structure are updating or not.

    You can also try to convince her to keep her maiden name.

    How do you change your PSN name on Playstation 3?

    I have a really stupid name on Playstation Network, and I was wondering how I change my name to something else. Also, this is on a secondary account, so I need to know if it is possible on a secondary account.How do you change your PSN name on Playstation 3?
    PSN name cannot be changed. You should have read carefully during the account making process. It's true to both the main account and the sub-account. The only way you can have a new PSN name is to make another account and use another e-mail address.



    Now, if you wanna get rid of that PSN name of yours and use the e-mail listed to it, you will have to close your account and start over again. This also means that all the trophies earned will be erased.How do you change your PSN name on Playstation 3?
    I'm afraid that you can't change your PSN



    What you could do is make a new one? perhaps? if that helps..?

    How do I change the name of my network from linksys to something else?

    About a year ago I managed to set up an old linksys router to my new mac and my wireless internet has been working fine. I even figured out how to change the name, not broadcast the network, and encrypt a password and everything.



    Well, I had to reset the router yesterday, and now I'm connected to %26quot;linksys%26quot; (internet is working fine). How do I change the name to something more unique, and make my network more secure? I tried going to http://192.168.1.1 and it won't connect. I tried going to http://192.168.0.1 and it asks for a user name and password. I tried %26quot;admin%26quot;, I tried leaving password blank, I tried %26quot;password%26quot; - nothing is working.

    Help me. Thank you.How do I change the name of my network from linksys to something else?
    You don't give the model number of the router so can't tell you straight away as there are two different ways into Linksys routers. Both are listed on the site below.How do I change the name of my network from linksys to something else?
    On the address that works: Leave the username blank and type %26quot;admin%26quot; (without the quotes) under password. If that doesn't work, try %26quot;administrator%26quot; (no quotes) under password. %26quot;admin%26quot; should work.How do I change the name of my network from linksys to something else?
    Go to http://compnetworking.about.com/od/route to get the default login for your router. You will need to know the model. Once you get in, you can reset the name.How do I change the name of my network from linksys to something else?
    about link sys router by default factory firmware you should try:

    User name: admin

    Password: admin

    it must work on your router.How do I change the name of my network from linksys to something else?
    Try username:admin and password:admin



    It worked for me once.How do I change the name of my network from linksys to something else?
    read the manual.............. if you dont have any download it from the web address of your hardware manufacturer...........
  • phone
  • What do you put in a duvet cover
  • How can I change the network interface name (eth0, eth1 things) ?

    I have set up a private network to demonstrate Man-In-The-Middle attacking tools. I am using 3 machines. Pc1 is a server, pc2 is an attacker and pc3 is a client. My server has 2 interfaces. Eth0 connects to external gateway and eth1 connects to internal router. By some reason, eth0 has changed it's name to dev22959 and eth1 become eth0. Can anyone tell me how can I change them back please?How can I change the network interface name (eth0, eth1 things) ?
    The eth0, eth1 nomenclature says you are using Linux... You didn't say what distro. If it's SuSe, use YAST2.



    6/24 Update:



    See http://defindit.com/readme_files/netsetu for assistance. I think this will explain what's happening and how to fix.



    Also read: https://bugzilla.redhat.com/show_bug.cgiHow can I change the network interface name (eth0, eth1 things) ?
    I'd unplug that external gateway first.

    You may have some unwanted outside help



    Just because you are using Linux does not in itself prevent hackers from attacking and taking over your machine. It just makes it a little harder. How you harden your server and what security functions you put in place really decides how %26quot;hacker proof%26quot; a machine is. It's all software, and what one person can design, another person can figure out.



    Servers are favorite targets and reprogramming the network interfaces is usually part of taking control of a machine and adding it to a botnet.



    Hope I'm wrong



    Good Luck